Car raised on the ramp for underbody inspection at KITH Cars Garage & Bodyworks, Hackbridge

Welding & Rust Repair in Hackbridge, SM6

Welding & Rust Repair at our own bodyshop on London Road in Hackbridge. We are on no insurer panel, so the repairer is your choice and nothing we tell you is steered by an arrangement with one.

  • On London Road, SM6 — walk in
  • Mon–Fri 8am–8pm · Sat 8am–5pm
Loading instant quote…

Why Hackbridge produces the damage it does

Two things are happening to this place at once, and both end up on panels.

The first is the building. The old Felnex estate was about a million square feet of industry and, per the published figures for the Felnex and New Mill schemes, was approved in 2016 for 725 homes plus a supermarket, a surgery, a care home and a bus interchange. New Mill Quarter adds another 440. That is over eleven hundred homes going into a suburb whose central parade is Edwardian and was laid out for a fraction of the traffic, and it brings years of construction vehicles, delivery vans and contractor pickups through streets that were not drawn for them.

The second is where all those cars end up overnight. Sutton Council’s own ward parking survey for Wandle ward, which is Hackbridge, found 67 per cent of residents saying their street has a parking problem, 39 per cent parking on the street, and 74 per cent saying the trouble is on weekdays. A street parked solid on both sides is where mirrors get clipped, where doors get opened into the car alongside, and where a van reversing to a door takes a corner off something.

Which is why the bulk of what comes through our door from a hundred yards away is low-speed and cosmetic rather than dramatic. Scuffed bumpers, creased doors, kerbed wheels, mirror casings. Not motorway damage. Parked-up, built-up, somebody-was-in-a-hurry damage.

Before you decide whether to claim

  • Price it first. A single scuffed panel is often close to a typical excess, and claiming costs you the no-claims discount on top.
  • Check who you are claiming against. If nobody is identified, your insurer has nobody to recover from, so it goes down as a fault claim even though it was not your fault.
  • Notify either way. Most policies require it. Notifying is not claiming, and saying so on the call is worth doing.
  • Do not accept a roadside cash offer before you have a figure. They are reliably below what the job costs, and once accepted the way back is hard.

We will give you the repair number so you can do that sum properly. The other half of it comes from your insurer, and asking them directly is the only way to get it right.

Welding & Rust Repair: what’s involved

Most cars have a monocoque body, meaning the shell itself acts as the chassis. Sills, floor pans, crossmembers and the areas around suspension and seat belt mountings carry load, so rust there weakens the car. Corrosion usually starts where water and road salt collect: inside sills, behind arch liners, along seams and around jacking points, and it often works from the inside out.

The MOT treats corrosion seriously. Excessive corrosion in load-bearing structure is a failure, particularly within 30cm of prescribed areas such as suspension, steering and seat belt mounting points. A proper repair means cutting back to sound metal, fitting a new steel section and welding it in, then sealing and protecting it inside and out. Covering rust with filler or a plate over rotten metal doesn't fix it, and a tester can fail an inadequate repair on a structural area.

From £80Written quote first
2 hours – 3 daysTypical time in the workshop
3 monthsWorkmanship warranty

Signs of rust that needs welding

Bubbling paint on sills or arches

Rust forming underneath the paint. It's usually more extensive than the visible bubbles suggest.

Holes or flaking metal underneath

Floor pans, sills, jacking points and crossmembers that flake or can be pushed through with a probe.

MOT advisory or failure for corrosion

An advisory is a warning worth acting on; a failure for structural corrosion must be repaired before the car can pass.

Soft or crumbling jacking points

If the sill crushes or the jack sinks into it, the structure around it is weakened.

Rust around suspension mountings

Corrosion near spring seats, strut tops, subframe or trailing arm mounts is structural and needs prompt repair.

Water in the footwells

Can be caused by holes in the floor, although blocked drains and door seals are more common causes, so we check.

Rust on door bottoms and boot floor

Often cosmetic rather than structural, but cheapest to repair while the rusted area is still small.

When should it be done?

Deal with structural rust as soon as it's found, ideally before the MOT so you have time to plan. Corrosion advisories are worth acting on, because another winter of salted roads can turn an advisory into a failure needing bigger repairs. Cosmetic rust on door bottoms or arch edges isn't a safety issue, but it's cheapest to fix while it's still at the bubbling stage. Older and classic cars benefit from a regular underside inspection.

  • MOT advisory mentioning corrosion: before the next winter or MOT
  • MOT failure for corrosion: before retest, and before driving at all if the defect was rated dangerous
  • Bubbling paint on sills, arches or door bottoms: while the rust is still small
  • Buying an older or classic car: underside inspection before or soon after purchase

How we repair rust and welding

  1. Inspection on the rampWe examine the underside, probe suspect areas and read any MOT failure sheet, separating structural corrosion from cosmetic.
  2. Written quoteWe explain what's structural, what's cosmetic and what should be prioritised. Rust sometimes proves more extensive once cut into, and we'll contact you before doing anything extra.
  3. Access and protectionTrim, arch liners, seats or carpets are removed as needed, and fuel lines, brake pipes and wiring are protected or moved away from heat.
  4. Cut out corrosionRusted metal is cut back until we reach clean, sound steel.
  5. Fabricate or fit repair sectionsNew steel sections are formed in the workshop, or pre-formed repair panels are used where available and a good fit.
  6. Weld inThe new metal is MIG welded in, seam welded where the structure requires it, and the welds are dressed back.
  7. Seal and protectJoints are seam sealed and primed, the underside is coated with underbody protection and enclosed sections are treated with cavity wax.
  8. Refit, check and hand overEverything is refitted, pipes and wiring are checked, and we explain what was repaired and anything else worth watching.

Steel and materials

Repairs are made with new steel of a suitable thickness for the area, either fabricated in the workshop or using pre-formed repair panels where they're available and fit well. After welding, joints are sealed, primed and protected with underbody coating, and enclosed sections such as sills are treated with cavity wax, which creeps into seams to slow future corrosion from the inside.

  • New steel sheet of the appropriate thickness
  • Pre-formed sill and arch repair panels where suitable
  • Weld-through primer and anti-corrosion primer
  • Seam sealer
  • Underbody protection and cavity wax

How long it takes

2 hours – 3 days

A single small MOT repair can often be done in 2–4 hours. Sills, floor sections or several areas can take 1–3 days, and extensive work on older cars longer. If the rust turns out to be worse once cut out, we'll call you before going further.

What’s included

  • Underside inspection and written quote
  • Cutting out corrosion back to sound metal
  • New steel welded in
  • Seam sealing, priming and underbody protection on the repair
  • Cavity wax in enclosed sections that have been repaired
  • 12-month workmanship warranty

We are on London Road, which is the point

There is no journey to describe. We are at Unit 1 Soho Mills on London Road, which is the road you are already on — a couple of minutes from the station, the parade and the level crossing, and inside the SM6 postcode rather than a drive away from it.

That changes how you can use us, and it is worth saying plainly:

  • You can walk in. If something is making a noise, bring it down and we will look at it rather than booking you in for a week on Thursday to hear a description of it.
  • You can leave the car and walk home. Most of Hackbridge is ten minutes on foot from the yard, which removes the whole business of arranging a lift or waiting in a reception.
  • You can get to the station from us. If the car has to stay in, you are a few minutes from the platform rather than stranded.
  • We can look at it before quoting. Where a job needs the car on a ramp to price honestly, being local means that is a short detour rather than a second trip across town.

Being the workshop in the place rather than the workshop near it is most of why people use us. It is also why we would rather tell you something is not worth repairing than take the work — we are going to see you in the Co-op.

Open in Maps

Welding & Rust Repair in Hackbridge: your questions answered

Someone hit my car on my street and drove off.

Photograph it before you move it, ask about CCTV the same day, and look for paint transfer. Be aware the national untraced drivers scheme does not pay for vehicle damage unless somebody was significantly injured, so a no-injury hit and run usually comes down to your own policy or paying. Our guide pages go through it.

Do I have to use my insurer’s repairer?

No. The repairer is your choice on any claim. We are on no insurer panel, so nothing we tell you is steered by an arrangement with one.

Do you do paintless dent removal?

No. Every dent we repair is straightened and then painted and blended. On the dents PDR can fix a PDR specialist will be cheaper, and we would rather say so than take the work.

Where exactly are you in Hackbridge?

Unit 1 Soho Mills, London Road, SM6 7HN — a couple of minutes from Hackbridge station and the parade. There is room to leave a car with us.

Can I just turn up?

For a look at something, yes. For work that needs a ramp and a slot, call or put your registration into the box on this page first so we can give you a time rather than keep you waiting.

Price your welding and rust repair now

Enter your reg and we’ll look up your car and price the job from our own labour rates and the book time for your model. Then book it in with a fixed written quote before any work starts.

  • Free, about 30 seconds, no sign-up
  • Parts, labour and VAT included
  • 12-month workmanship warranty
  • Collection from Hackbridge can be arranged
“It’s rare to find a garage you can truly trust. Fair price, brilliant customer service.”Thinushan K. · ★★★★★ Google

Prefer to talk? Call 020 4629 9469 or WhatsApp us.

What we actually see from Hackbridge

The damage that comes to us from a hundred yards away is overwhelmingly low-speed. Parked-car damage, in a suburb where 67 per cent of residents told the council their street has a parking problem and 39 per cent park on it.

  • Bumper corners and scuffed ends. Reversing into a gap on an Edwardian street that was laid out before anyone owned a car.
  • Door edge dings and creased doors. Cars parked close enough on both sides that there is no safe arc to open into.
  • Mirror casings. Taken off by a passing van on a road narrowed to one lane by parking.
  • Kerbed alloys. The commonest thing on the list, and the one most people put off longest.
  • Scrapes down one side. Usually a squeeze past something double-parked or a delivery lorry at the parade.

What we see far less of is the high-speed structural damage that comes off the A217 and the A232. Hackbridge sits off the main network rather than on it, which is good news for the severity of what happens here and no help at all to the state of the paint.

Chat on WhatsApp