Paint Codes, and Why the Code Is Only the Start

Your car has a paint code on a sticker somewhere. It is necessary and it is not sufficient, because the paint on your car is no longer the colour it left the factory.

  • Hackbridge SM6 7HN
  • Any insurer · your choice of repairer
Loading instant quote…

Where the sticker usually is

It varies by marque and by model year, so treat this as where to look first rather than gospel.

MarqueUsually
Volkswagen, Audi, Skoda, SEATBoot — in the spare wheel well, under the floor panel, or on the service book
BMW and MiniUnder the bonnet, on the strut tower or slam panel
Mercedes-BenzUnder the bonnet, or on the driver’s door shut
FordDriver’s door shut, on the B-pillar sticker
VauxhallUnder the bonnet, or in the boot
Toyota, Honda, Nissan, MazdaDoor shut or door jamb sticker, driver’s side
Anything elseDoor shuts first, then under the bonnet, then the boot

The code is usually two or three characters, sometimes with a name beside it. If you cannot find it, the reliable fallback is the registration or the VIN — put the registration in the box below and we can look it up rather than you crawling round the car with a torch.

Why the code is not enough on its own

Two reasons, and both are about time rather than about paint.

  • Your car has faded. Ultraviolet light, washing and weather move the colour. A five-year-old car in a factory-correct colour is not the factory colour any more, and mixing exactly to the code produces a panel that is visibly newer than its neighbours.
  • One code can have several variants. Manufacturers change supplier or batch mid-production, so the same code can exist in two or three recorded versions. The code narrows it down; it does not finish the job.

This is why a proper job involves a spray-out card — a test panel sprayed and held against the car in daylight — rather than mixing to the code and going straight onto the wing.

Blending, and why a repair can cross panel lines

If one wing is painted to the exact edge of the panel and the door beside it is not touched, the join between them is where the eye goes. So paint is blended into the adjacent panel and faded out, which makes the transition gradual rather than a line.

That is not padding the job. It is the reason you cannot see the repair afterwards, and an estimate that includes blending into neighbouring panels on a metallic is usually being honest rather than greedy.

The colours that cause trouble

Colour typeWhy
Solid white, solid redStraightforward, usually fine
Silver and grey metallicsThe flake has to lie the same way or the panel changes shade with the light
Pearls and three-stageBuilt in multiple coats, so the match depends on coat thickness as well as colour
Bright reds that have agedRed pigment fades hardest of all, so an older red is often a long way from its code
Factory matt and satin finishesCannot be polished to correct a flaw, so the spray has to be right first time

None of these are reasons not to repair. They are reasons a metallic or pearl repair takes longer and needs a spray-out, and reasons to be suspicious of anyone quoting a three-stage pearl at the same rate as a solid white.

Price your repair now

Put your registration in and we will price it. Prefer to talk? Call 020 4629 9469 or WhatsApp us.

Your questions answered

Can you match my colour exactly?

We match to the car rather than to the code, using a spray-out card checked in daylight. On a faded metallic that means blending into the next panel so there is no edge to see.

My code has worn off the sticker.

The registration or VIN will get us there. Bring it in or put the reg in the box below.

Why does a small repair need two panels painted?

Because the paint is blended out rather than stopped at the panel edge. Stopping at the edge is what makes a repair visible.

Is touch-up paint from the code any good?

For a stone chip on a solid colour, it is fine and worth doing before rust starts. On a metallic or a faded panel it will not match, because it is mixed to the code and your car has moved on.

How long until the paint is fully hard?

Handling-hard quickly, fully cured over following weeks. We will tell you when to avoid polishing or waxing, which matters more than people think on fresh paint.

Chat on WhatsApp