Dent Repair

Every dent we repair gets painted, because we do not offer paintless removal. That makes us more expensive than a PDR van for the dents PDR can fix, and it makes us the right answer for the ones it cannot.

  • Hackbridge SM6 7HN
  • Any insurer · your choice of repairer
Loading instant quote…

Is this what you have?

Four checks, in order. They take about two minutes in daylight and they decide which repair you are actually looking at.

  1. Look along the panel from the end of the car rather than straight at it. Dents hide from face-on and show badly at a shallow angle.
  2. Check whether the paint is broken. An unbroken dent means the metal stretched without the film cracking; a broken one means filler and primer as well as straightening.
  3. Press gently at the edge. A dent that pops slightly is shallow. One that feels solid has stretched the metal and will not simply come back.
  4. Look for a sharp line in it. A crease is a different and harder job than a smooth dent.

How we repair it

The metal is worked back in stages rather than pulled in one go, because metal forced out too fast oil-cans and never sits flat again. Where it will not come fully back, the remaining difference is filled and flatted level.

Then primer, colour, lacquer and a blend into the neighbouring panels. The paint is not optional on our repairs: straightening alone leaves a panel that is the right shape and the wrong finish.

What it costs, panel by panel

Including VAT, on an ordinary five-seater, with the paint blended into the neighbouring panels. Blending is included on our rate card rather than being an extra line.

PanelPrice inc VAT
Front bumper£370 – £650
Rear bumper£260 – £540
Front wing£260 – £540
Rear quarter£260 – £540
Door£320 – £600
Bonnet£260 – £540
Boot lid£380 – £660
Roof£440 – £720
Trim and mirrors£200 – £480

SUVs and estates carry a small uplift and vans a larger one, because there is more panel to cover. Every band runs upward from the card figure rather than either side of it.

What you can try yourself

There is very little worth attempting on a dent, and the suction cups sold for it work on exactly one kind — a shallow, smooth, unbroken dent in the middle of a large flat panel. On anything creased, anything near an edge, and anything where the paint is broken, they either do nothing or stretch the metal further and make the professional repair harder.

When to stop. If two careful attempts have not improved it, stop there. Almost every job we see that cost more than it should have is one where a reasonable first attempt turned into a fourth.

How soon it needs doing

A dent with unbroken paint is not urgent. A dent with the paint split is, because it is an open route to bare metal on a panel that now holds water in the bottom of the depression.

Price your repair now

Put your registration in and we will price it. Prefer to talk? Call 020 4629 9469 or WhatsApp us.

Your questions answered

Do you do paintless dent removal?

No. The panel is straightened and then painted and blended. We would rather tell you that now than quote a PDR price and find a reason it cannot be done once your car is in the workshop.

Why is a small dent not a small price?

Because the dent is the small part. On a door, the trim card comes off, the water shield is peeled back and resealed, the glass is lowered and supported, and then the panel is painted and blended. The metalwork is often the quickest bit.

Can you give me a price from a photograph?

A band, yes. The exact figure needs the car, because how deep the damage goes and whether the metal has stretched are the two things a photograph does not show, and they are the two things that move the number.

Is it cheaper to replace the panel?

Sometimes, and only on bolt-on panels — a wing, a bonnet, a boot lid, a door. On a welded panel like a rear quarter, straightening nearly always wins. We price both where it is a genuine choice.

Chat on WhatsApp