ADAS Recalibration After a Repair

Your car probably has a radar behind the front bumper and a camera behind the windscreen, and both are aimed rather than just mounted. Refit them a degree out and the car reads the road wrongly — with nothing on the dashboard to tell you.

  • Hackbridge SM6 7HN
  • Any insurer · your choice of repairer
Loading instant quote…

What ADAS actually is on your car

Advanced driver assistance systems: the features that watch the road for you. Most cars built in the last decade have at least one, and they rely on sensors mounted in exactly the places bodywork damage happens.

SystemUsually sensed byMounted
Autonomous emergency brakingRadar, sometimes with a cameraBehind the front bumper or grille badge
Adaptive cruise controlForward radarBehind the front bumper
Lane keeping and traffic signsForward cameraBehind the windscreen
Blind spot monitoringRear corner radarsBehind the rear bumper corners
Parking sensors and camerasUltrasonic sensors, camerasIn both bumpers and the tailgate

Every one of those positions is a panel that comes off for a routine repair.

Why refitting is not enough

These sensors are aimed at the road from a known position. The calibration tells the car where the sensor is pointing relative to the vehicle’s centre line and the ground, and the software interprets everything it sees through that.

A bracket that goes back a fraction out, or a bumper sitting a few millimetres differently, moves the aim. At ten metres that is nothing. At a hundred and fifty metres, which is where adaptive cruise is looking, it is a different lane.

What happens when it is skipped

Nothing, on the drive home. That is the whole problem.

  • Emergency braking that activates for something in the next lane.
  • Emergency braking that does not activate when it should.
  • Adaptive cruise that locks onto the wrong vehicle or loses the one in front.
  • Lane keeping that nudges you toward the line rather than away from it.
  • Parking sensors reading the ground as an obstacle and beeping continuously.

A miscalibrated system usually throws no warning light, because as far as the car is concerned the sensor is working perfectly. It is simply looking somewhere slightly different from where the software thinks.

Which jobs trigger it

  1. Front bumper off. Forward radar on most cars. Nearly always needs checking.
  2. Windscreen out or replaced. Forward camera. Always.
  3. Rear bumper off. Blind spot radars on cars that have them.
  4. Suspension or geometry work. Changes the car’s attitude, which changes where everything points.
  5. Anything that moved a mounting point. Including structural repair near a sensor location.

We check what is fitted to your car before the panel comes off, not after. If recalibration is part of the job you will be told at the estimate rather than at collection.

Static and dynamic, and why weather can delay your car

There are two methods, set by the manufacturer rather than by us, and some cars need both.

StaticDynamic
WhereIn the workshopOn the road
HowPrinted targets set at measured positions in front of the carDriven on a route while the system relearns
NeedsA level floor, clear space ahead, controlled lightingClear lane markings, suitable weather, a safe route
Held up byVery littleHeavy rain, fog, low sun, worn road markings

That last row is a real reason a car can be finished in every other respect and still not ready. Nobody can make lane markings appear in fog, and a dynamic calibration signed off in conditions that were not suitable is worth nothing.

Two more triggers people miss

  • Four-wheel alignment on its own. Setting the tracking changes the relationship between the steering and the road, and on many cars that alone requires the systems to be recalibrated. So a bodywork job that ends at the alignment is not necessarily finished at the alignment.
  • A different wheel or tyre size. Changing rolling radius or ride height moves every sensor’s view of the road. Fitting mixed or uneven pairs does the same thing unevenly.

Ask for the report, and keep it

There is a paperwork consequence to this as well as a safety one. Repair records get examined after a later accident, and a missing calibration record on a car whose repair required one is a difficult thing to explain to anybody.

  1. “Does this repair trigger a calibration on my car?” A yes or a no with a reason, not a shrug.
  2. “Static, dynamic, or both?” It tells you whether the weather can hold your car up.
  3. “Is it in the estimate?” Before the work starts. It is a real cost and it should be visible.
  4. “Will I get the calibration report?” Keep it with the invoice. It is the proof the job was finished properly.

Those four questions are worth asking wherever you take the car, and the quality of the answers will tell you most of what you need to know about the shop.

Price your repair now

Put your registration in and we will price it. Prefer to talk? Call 020 4629 9469 or WhatsApp us.

Your questions answered

How do I know if my car has these systems?

If it has adaptive cruise, lane assist, automatic emergency braking or blind spot warning, it has sensors that can need recalibrating. The handbook lists them. Give us the registration and we will tell you.

Is recalibration expensive?

It varies considerably by manufacturer and by which system. What it is not is optional on a car that needs it, and the honest version is telling you the cost at the estimate rather than discovering it at the end.

Will a warning light come on if it is wrong?

Usually not, and that is the point. The sensor reports itself as healthy. It is the aim that is out, and the car has no way to know.

My insurer has not included it in the authorisation.

Then we raise it. It is a necessary part of returning the car to the condition it was in, and an engineer who understands the system will authorise it.

Chat on WhatsApp